Sash Lock Door Handles
If you're looking to improve the security of your home without sacrificing aesthetics, go for sash lock door handles. They can be used with mortice latches or sash lock and can be paired with a night latch to add locking for doors inside.
These handles consist of a lever/handle mounted on backplates and are typically used with a three or five lever mortice lock. They can be used in conjunction with tubes latches.
Lever Lock Handles
There are a variety of lever handles that will fit any decor. Rustic lever handles work well with ranch or farmhouse style decor and are also well-liked in modern homes. Classic lever handles are either round or spherical and easy to hold. They are simple, affordable and can be used with any home design. Choose polished or satin nickel chrome handles to create a sophisticated style. These finishes are robust and easy to clean. Other choices include antique bronze and polished brass. A lot of handles feature a decorative design, such as small amber worm eyes or long-horned crystals. Some levers have pins, stars or other shape molded in the bottom.
To change the lever lock door handles you require the appropriate screwdriver, or tool to disassemble the handles. Depending on the model and design you may need to employ an awl, or nail to remove the lever handle. Some lever handles have a small notch or hole on the opposite side of the base which can be used to break it open.
Follow the manufacturer's directions for removing your handles when you have the right tool. Make sure the spindle is in place on the new lever. Existing doors might have been morticed for locks and latches in the past, which requires a specific spindle. Most lever handle manufacturers offer an established door spindle size for handle.
If you are replacing a sash lock door handle the handle that was previously used must be removed and the tubular latch bolt which is in the door, must be disconnected from the strike plate in the door frame. The latch bolt has to be put through a hole in the door's frame and then connected to the strike plate.
It is essential to keep in mind that when you install the lever handle for the first time the handles that comply with the ADA (Americans with Disabilities Act) are designed to operate by hand. The user shouldn't be required to hold their hands tightly or turn their wrists. To meet ADA standards of compliance, the lever door handle cannot be operated using only fingers and thumbs, or even the entire hand.
Sash Lock Handles
The primary function of sash lock door handles is to pull the sashes that are moving together to form a seal. This stops drafts from entering the room and helps maintain indoor temperatures, which can help save energy bills throughout the year. These are ideal for doors that do not call for a keyed lock.
Sash locks are also known as mortice sashlocks. They incorporate a dead bolt and latch into one case fitted to the surface of a door. They are used in conjunction with door handles and come in a range of choices.
The lever lock handle is operated by a lever with an opening cut into the backplate below. This allows a key that is inserted into the mortice frame to operate it. It is most often used for non-locking doors, such as dining rooms and living spaces, but can be paired with a tubular latch for a more secure internal door.
These are designed to keep the sash in place at various points, and feature a hook that fits inside the keeper. They are available in different styles and designs that fit different types of windows like sliding or hinged casement windows. Some are made of cast aluminium while others are made of brass or wrought iron. They're available in a range of finishes to complement other elements of your door furniture for instance, escutcheons that secure the keyhole.
3 lever bespoke sash windows locks are suitable for internal doors but not for external doors, since they don't provide the level of security that insurance companies require. They also have a lower resistance to forced entry, which makes them more vulnerable than their certificated 5 lever counterparts.
A door sash that has five levers is the ideal choice for exterior doors. It offers higher levels resistance to forced entry, and is harder to bypass or pick. The locks are upgraded in design that's been tested and certified to meet strict building, disability, and fire regulations.
To replace the handle of a sash lock, remove the old fastener from both ends by taking out the screws. Make sure you have a screwdriver in your possession and take care to separate the components to avoid damaging them. Use a pencil to mark the location of the screw holes so that you can align the new sash windows fastener properly when it comes to fitting. Remove any dust or flickers of paint before screwing the new fastener in. Test the handle to make sure it works correctly and creates an airtight seal.
Tubular Latch Handles
The tubular latch is an internal latch which is operated by turning the handle. It is designed to shut the door however, it doesn't secure the door as a mortice lock would. These are most often used on doors that are internal and there is no requirement for locking. They can be fitted with lever or knob handles.
There are many sizes of tubular latches available. They range from the cheapest to top-of-the-line architectural quality. The dimensions of the door depend on its use and whether it has an lock. For instance, a bathroom door may need to have an open and thumbturn mechanism in the event of emergency, so you'll require an latch that can be locked.
The selection of the correct latch depends on the backset size of your door. You will need to choose a latch that has a backset measurement that is equal to the distance between the edge and the centre of the door's hole to accommodate the handle rose or knob. This will ensure that your door handle or knobs can operate the latch smoothly.
If you're installing a sprung or unsprung door knob or lever, it is essential to choose a durable tubular latch that has a double-sprung follower and tongue. This will provide an effortless operation for the latch and prevent it from becoming sluggish and inactive after regular use.
The next step is to install the latch onto the door. The first step is to make sure that the latch is level with the top of the door frame/casing. Mark the location of the latch and drill holes. Countersink drill bits can help create the correct recess so that it can fit comfortably.
Once the latch is installed, you can screw it onto the door. Before installing your locks or handles it is essential to check that the latch is functioning correctly. To check you need to open and close the door a few times. If it's not functioning properly Try lubricating the door with WD40. Then re-try it. If you continue to experience problems, it might be necessary to call a professional installer or locksmith.
Keyhole Handles
Keyhole handles are fitted with a tubular latch that is installed in the door. This latch is used to open and shut the door. When the handle is pushed down, the handle is engaged with the latch and when pulled up, it releases it, allowing the door to be opened. These kinds of handles are usually used on internal doors like living rooms and dining room doors but can also be used on front doors if they are paired with a nightlatch.
Door knobs are a modern kind of handle that has spring levers and handles on a square or round fixing rose, with a matching thumb turn or escutcheon. They are available in a variety of styles and finishes to suit the doors of your home. They can be used with Euro cylinders or multipoint locking systems for additional security. This is accomplished by locking the door at various points along the length of the door. Door handles that are compatible are required with the correct dimensions for the center of the lock to fit the barrel.
Keyhole escutcheons are a cover for the door's keyhole that hides it from view and give a more stylish appearance to the handle. They come in both an open or screw on design and come in various finishes to match the door handle. Alternatively, a concealed escutcheon is able to be attached to the door's edge to further hide the keyhole and provide a more modern appearance.
The majority of the handles described above are designed to be used with a mortice or sash lock mechanism, however some are compatible with Euro cylinder locks as well. These locks are installed on uPVC doors and require compatible door handles that have a Euro cutout for a cylinder and the appropriate screw holes inside the backplate to accommodate the euro cylinder. These handles may also require an escutcheon for Euro-cylinders or a standard escutcheon according to the use.
It's important to know the distinctions between a sash or mortice lock and a tubular lock, and the compatibility requirements for each. You'll need to consider the door thickness, door hinges and frame reinforcements, as well as the door handle backplate size, lock centre dimensions and the screw centres for the cylinder.