Subaru Impreza Key Problems
Subaru Impreza keys allow owners to lock and unlock their vehicles with a simple push of one button. A dead battery on the key fob is the most frequent reason for the key fob to not work.
It is easy to replace the battery. Find the small unit that houses the round flat cell within the key casing. Replace the battery by opening the case and ensuring that the correct side of the battery is facing upwards.
Keys lost or stolen
We've all been there moment: you reach into your pocket to grab keys, but they're not to be found. It's not difficult to locate your subaru new Key fob cost keys, and there are many methods to replace them quickly and easily.
If you already own a standard metal car key, you can get it duplicated by visiting a hardware store that has Subaru blanks. These are usually marked "Subaru". They may need to replace the key fob battery as well in which case you'll want a CR-2032 replacement that can be found at many hardware stores as well as some retail stores like Amazon.
For the key fob or the remote/intelligent key, you'll need to visit an auto locksmith who can program new subaru key keys for your Subaru model. The cost will range from $50-$250 depending on whether your Subaru comes with a transponder chips or smart key feature.
You'll need to provide the locksmith or dealership with your vehicle identification number (VIN) located on the dashboard, just below the windshield. This number is required to verify your car's warranty status and also to verify that the key is correct for your Subaru model and year. The VIN contains details about the company and the country where the car was manufactured. It also informs you whether there are any unique features in the car like immobilizers, which prevent the engine starting in the event of a misplaced key being used.
Key fob is not working correctly
There are a variety of reasons why the key fob does not function properly. It could be as straightforward as a battery issue or a more intricate repair. A dead battery, programming issues with the car or other problems with the electrical system in the vehicle are just a few of the most frequent issues with the Subaru keyfob.
One of the most simple fixes is to replace the battery in the key fob. They are available at hardware stores as well as big box retailers. They cost about $10 each and can be replaced in a few minutes. The owner's manual should have instructions on how to replace lost subaru key to do this. There are many YouTube videos that will walk you through the procedure.
Another reason could be water damage to the key fob. The metal clips that secure the batteries may be damaged if take it out of your pocket and get it wet. If the key fob still has problems after replacing the batteries, the issue may be related to the transmitter or with other components of the vehicle. A certified technician will be able to check these and then troubleshoot the vehicle to find the problem. They can reprogram the key fob, and ensure that it is compatible with the vehicle. They can also check if there are any antenna or wiring problems that prevent the key fob from sending signals in a correct manner.
Unlocking or Locking Issues
If your subaru smart key replacement Impreza key fob won't unlock or lock the doors, it could be a range of causes. A dead coin battery on the key fob or a malfunctioning receiver module water damage, signal interference or a key that is paired that requires reprogramming are all possible causes of this issue. To resolve this issue, you can go to a locksmith or the dealer to have the key fob reprogrammed.
If you're unable to open the trunk the key fob might have the setting for the trunk lock set to "on". This is a safety feature that stops thieves from stealing your vehicle. Contact your subaru key replacement cost dealer to change the trunk lock/unlock settings.
A locked steering wheel could also occur when the vehicle locks automatically following an abrupt turn. This happens when the car senses a rapid turn, which could impact its transmission system and engine. To prevent this, it is advisable to slow down when turning.
Verify that the dealer locksmith has programmed and cut the spare keys or replacement keys you have. Also, make sure the emergency key is working on each of the door cylinders and trunk, since these are the only methods to gain access to the vehicle if locked out. Also, check that the new key or spare doesn't have any marks or scratches, or evidence of tampering.
Keyless Entry
Many Subaru models come with keyless entry. This allows you to lock or unlock the trunk and doors by pressing the remote. The system works with the short radio signal which communicates with the vehicle when you're within its range. There are many different systems available that provide this feature starting with simple kits that unlock just the door for the driver, to more advanced ones that permit remote start and smartphone integration.
The convenience of keyless entry on your Subaru is convenient and secure however, it's crucial to know what to do in the event that the buttons don't function properly. You can attempt to solve the issue at home, but you may need to take your Subaru to a professional for a diagnosis. In the meantime, you can follow these tips to help keep your car's remote functioning as intended.
If your Subaru's key fob becomes wet, it's a great idea to clean the electronic chip from it by using isopropyl ethanol and let it dry completely before you put the battery back into. By doing this regularly, you can prevent moisture from causing damage to your fob and causing further issues later on.
If your key fob has stopped responding, turn off the engine and open the door for the driver. Press the button to open the door, close it by pressing the button a particular number of times (usually one for each digit) until you hear a chime. Repeat the procedure for each door until all doors respond.